LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Quest SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Control System - Introduction) >> System Description >> System >> Cooling Fan Control >> COOLING FAN CONTROL : System Description >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
INPUT/OUTPUT SIGNAL CHART

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS)
Camshaft position sensor (PHASE)
Engine speed(1)
Piston position
Cooling fan control IPDM E/R
โ†“
Cooling fan relay
โ†“
Cooling fan motor
Engine coolant temperature sensor Engine coolant temperature
Refrigerant pressure sensor Refrigerant pressure
Battery Battery voltage(1)
Combination meter Vehicle speed(2)
BCM Air conditioner ON signal(2)
(1) The ECM determines the start signal status by the signals of engine speed and battery voltage.
(2) This signal is sent to ECM via the CAN communication line.