Front Power Window RH Circuit Inspection (Power Window and Door Lock/Unlock Switch RH Operation)

1. Turn ignition switch OFF.
2. Disconnect front power window motor RH.
3. Turn ignition switch ON.
4. Check voltage between front power window motor RH connector and ground.

   Connector	Terminals		Condition	Voltage (V) (Approx.)
   	(+)	(-)
   D105	3	Ground	UP	Battery voltage
   			DOWN	0
   	1		UP	0
   			DOWN	Battery voltage

   Fig 1: Checking Power Window & Door Lock/Unlock Switch RH Output Signal

   Courtesy of NISSAN NORTH AMERICA, INC.

   OK or NG 

   OK: Replace front power window motor RH. Refer to , "REMOVAL AND INSTALLATION ".

   NG: GO TO 2.

1. Turn ignition switch ON.
2. Check voltage between power window and door lock/unlock switch RH connector D104 and ground.

   8 - Ground: Battery voltage 

   Fig 2: Checking Power Supply Circuit

   Courtesy of NISSAN NORTH AMERICA, INC.

   OK or NG 

   OK: GO TO  4.

   NG: GO TO 3.

1. Turn ignition switch OFF.
2. Disconnect BCM and power window and door lock/unlock switch RH.
3. Check continuity between BCM connector (A) and power window and door lock/unlock switch connector (B).

   A		B		Continuity
   Connector	Terminal	Connector	Terminal
   M20	68	D104	8	Yes

   Fig 3: Checking Power Window & Door Lock/Unlock Switch RH Power Supply Circuit

   Courtesy of NISSAN NORTH AMERICA, INC.
4. Check continuity between BCM connector (A) and ground.

   A		Ground	Continuity
   Connector	Terminal
   M20	68		No

   OK or NG 

   OK: Check the condition of the harness and the connector.

   NG: Repair or replace harness.

1. Turn ignition switch ON.
2. Check voltage between power window and door lock/unlock switch RH connector and ground.

   Connector	Terminals		Condition	Voltage (V) (Approx.)
   	(+)	(-)
   D104	7	Ground	UP	Battery voltage
   			DOWN	0
   	6		UP	0
   			DOWN	Battery voltage

   Fig 4: Checking Power Window & Door Lock/Unlock Switch RH Output Signal

   Courtesy of NISSAN NORTH AMERICA, INC.

   OK or NG 

   OK: GO TO 5.

   NG: GO TO  6.

1. Turn ignition switch OFF.
2. Disconnect front power window motor RH and power window and door lock/unlock switch RH.
3. Check continuity between power window and door lock/unlock switch RH connector D104 (A) terminals 6, 7 and front power window motor RH connector D105 (B) terminals 1, 3.

   7 - 3: Continuity should exist  .

   6 - 1: Continuity should exist  .

   Fig 5: Checking Front Power Window Motor RH Circuit

   Courtesy of NISSAN NORTH AMERICA, INC.
4. Check continuity between power window and door lock/unlock switch RH connector D104 (A) terminals 6, 7 and ground.

   6 - Ground: Continuity should not exist  .

   7 - Ground: Continuity should not exist  .

   OK or NG 

   OK: Replace front power window motor RH. Refer to , "REMOVAL AND INSTALLATION ".

   NG: Repair or replace harness.

1. Turn ignition switch OFF.
2. Check continuity between power window and door lock/unlock switch RH terminals.

   Power window and door lock/unlock switch RH	Terminals		Condition	Continuity
   	6	8	DOWN	Yes
   			NEUTRAL or UP	No
   		11	NEUTRAL or UP	Yes
   			DOWN	No
   	7	8	UP	Yes
   			NEUTRAL or DOWN	No
   		12	NEUTRAL or DOWN	Yes
   			UP	No

   Fig 6: Checking Power Window & Door Lock/Unlock Switch RH

   Courtesy of NISSAN NORTH AMERICA, INC.

   OK or NG 

   OK: GO TO 7.

   NG: Replace power window and door lock/unlock switch RH. refer to , "REMOVAL AND INSTALLATION ".

Check continuity between power window and door lock/unlock switch connector and ground.

Fig 7: Checking Power Window & Door Lock/Unlock Switch RH Ground Supply

Courtesy of NISSAN NORTH AMERICA, INC.

OK or NG 

OK: Check the condition of the harness and the connector.

NG: GO TO 8.

1. Disconnect main power window and door lock/unlock switch and power window and door lock/unlock switch RH.
2. Check continuity between main power window and door lock/unlock switch connector (A) and power window and door lock/unlock switch RH connector (B).

   A		B		Continuity
   Connector	Terminal	Connector	Terminal
   D5	11	D104	11	Yes
   	8		12	Yes

   Fig 8: Checking Ground Supply Circuit

   Courtesy of NISSAN NORTH AMERICA, INC.
3. Check continuity between main power window and door lock/unlock switch connector (A) and ground.

   A		Ground	Continuity
   Connector	Terminal
   D5	11		No
   	8		No

   OK or NG 

   OK: GO TO 9.

   NG: Repair or replace harness.

Fig 9: Checking Main Power Window & Door Lock/Unlock Switch

Courtesy of NISSAN NORTH AMERICA, INC.

OK or NG 

OK: Repair or replace harness.

NG: Replace main power window and door lock/unlock switch. Refer to , "REMOVAL AND INSTALLATION ".