Self-Diag Results Mode
DISPLAY ITEM LIST
| Item (CONSULT screen terms) | Diagnostic item is detected when.... | Check item |
|---|---|---|
| BATTERY VOLT [C1601] | When the power supply malfunction supplied to EPS control unit is detected. | , "DTC C1601 BATTERY VOLT " |
| TORQUE SENSOR [C1604] | When the torque sensor malfunction assembled in steering column assembly is detected. | , "DTC C1604 TORQUE SENSOR " |
| ANGLE SENSOR [C1605] | When the motor rotor position sensor malfunction of EPS control unit is detected. | , "DTC C1605 ANGLE SENSOR " |
| EPS MOTOR [C1606] | When the motor driver malfunction of EPS control unit or EPS motor malfunction is detected. | , "DTC C1606 EPS MOTOR " |
| CONTROL UNIT [C1608] | When the internal malfunction is detected in EPS control unit. | , "DTC C1608 CONTROL UNIT " |
| CAN COMM CIRCUIT [U1000] | When EPS control unit is not transmitting or receiving CAN communication signal 2 seconds or more. | , "DTC U1000 CAN COMM CIRCUIT " |
| CAN VHCL SPEED ABS [U1200] | When the malfunction is detected in vehicle speed signal received with CAN communication. | , "DTC U1200 CAN VHCL SPEED ABS " |
| NO DTC IS DETECTED. FURTHER TESTING MAY BE REQUIRED. | No NG item has been detected. | - |
CAUTION:
If "CAN COMM CIRCUIT [U1000]" is displayed with other DTCs, first perform the trouble diagnosis for CAN communication line.