Freeze Frame Data and 1st Trip Freeze Frame Data
WARNING: This page is about a different variant/trim than selected.
| Freeze frame data item |
Description |
| DIAG TROUBLE CODE |
The engine control component part/control system has a trouble code, it is displayed as DTC. |
| FUEL SYS-B1 |
- "Fuel injection system status" at the moment a malfunction is detected is displayed.
- One mode in the following is displayed.
- Mode2: Open loop due to detected system malfunction
- Mode3: Open loop due to driving conditions (power enrichment, deceleration enleanment)
- Mode4: Closed loop - using oxygen sensor(s) as feedback for fuel control
- Mode5: Open loop - has not yet satisfied condition to go to closed loop
|
| CAL/LD VALUE [%] |
The calculated load value at the moment a malfunction is detected is displayed. |
| COOLANT TEMP [°C] or [°F] |
The engine coolant temperature at the moment a malfunction is detected is displayed. |
| L-FUEL TRM-B1 [%] |
- "Long-term fuel trim" at the moment a malfunction is detected is displayed.
- The long-term fuel trim indicates much more gradual feedback compensation to the base fuel schedule than short-term fuel trim.
|
| S-FUEL TRM-B1 [%] |
- "Short-term fuel trim" at the moment a malfunction is detected is displayed.
- The short-term fuel trim indicates dynamic or instantaneous feedback compensation to the base fuel schedule.
|
| ENGINE SPEED [rpm] |
The engine speed at the moment a malfunction is detected is displayed. |
| VEHICL SPEED [km/h] or [mph] |
The vehicle speed at the moment a malfunction is detected is displayed. |
| ABSOL TH-P/S [%] |
The throttle valve opening angle at the moment a malfunction is detected is displayed. |
| B/FUEL SCHDL [msec] |
The base fuel schedule at the moment a malfunction is detected is displayed. |
| INT/A TEMP SE [°C] or [°F] |
The intake air temperature at the moment a malfunction is detected is displayed. |
| FUEL SYS-B2 |
These items are displayed but are not applicable to this model. |
| L-FUEL TRM-B2 [%] |
| S-FUEL TRM-B2 [%] |
| INT MANI PRES [kPa] |
| COMBUST CONDITION |