Terminal and Reference Value for Combination Meter

Terminal No.	Wire color	Item	Condition		Reference value (V) (Approx.)
			Ignition switch	Operation or condition
1	W	Battery power supply	OFF	-	Battery voltage
2	P	Ignition switch ON or START	ON	-	Battery voltage
3	B	Ground (power)	-	-	0
4	B	Fuel level sensor ground (-)	ON	-	0
8	LG	Fuel level sensor signal (+)	-	-	Refer to , "ELECTRICAL COMPONENT INSPECTION ".
9	L	CAN-H	-	-	-
10	P	CAN-L	-	-	-
13	V	Illumination control switch (LED)	-	-	Refer to , "SYSTEM DESCRIPTION ".
16	SB	Immobilizer/security indicator input	OFF	Security indicator ON	0
				Security indicator OFF	Battery voltage
18	G	Seat belt buckle switch RH	ON	Unfastened (ON)	0
				Fastened (OFF)	Battery voltage
21	B	Ground (illumination)	-	-	0
22
23	O	Ignition switch ACC or ON	ON	-	Battery voltage
24	GR	Parking Brake switch	ON	Parking brake applied	0
				Parking brake released	Battery voltage
25	V	Brake fluid level switch	ON	Brake fluid level low	0
				Brake fluid level normal	Battery voltage
26	O	Seat belt buckle switch LH	ON	Unfastened (ON)	0
				Fastened (OFF)	Battery voltage
28	R	Washer fluid level switch (Canada models)	ON	Washer fluid level low	0
				Washer fluid level normal	Battery voltage
29	W	O/D OFF switch	ON	O/D OFF switch pressed	0
				O/D OFF switch released	Battery voltage
31	O	Vehicle speed signal output (8-pulse)	ON	Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)]	NOTE: Maximum voltage may be 12 V due to specifications (connected units).
32	BR	Generator	ON	Generator voltage low	0
				Generator voltage normal	Battery voltage
33	V	Illumination output to double meter	-	-	Refer to , "SYSTEM DESCRIPTION ".
34	LG	Ambient sensor power	ON	-	5
35	B	Ambient sensor ground	ON	-	0 - 5 (Based on ambient temperature)
37(1)	LG	Manual mode signal	ON	Manual mode switch ON	0
				Manual mode switch OFF	Battery voltage
38(1)	SB	Not manual mode signal	ON	Manual mode switch ON	0
				Manual mode switch OFF	Battery voltage
39(1)	W	CVT steering shift up signal	ON	Manual mode switch ON Steering shift up operation	0
				Other than above	Battery voltage
40(1)	Y	CVT steering shift down signal	ON	Manual mode switch ON Steering shift down operation	0
				Other than above	Battery voltage
(1) With QR25DE