VIAS Control Solenoid Valve

With CONSULT

1. Reconnect harness connectors disconnected.
2. Turn ignition switch ON.
3. Perform "VIAS S/V-1" in "ACTIVE TEST" mode.
4. Check air passage continuity and operation delay time under the following conditions.

   Condition VIAS SOL VALVE	Air passage continuity between (A) and (B)	Air passage continuity between (A) and (C)
   ON	Yes	No
   OFF	No	Yes

   Fig 1: Checking Air Passage Continuity Between A And B

   Courtesy of NISSAN NORTH AMERICA, INC.

   Operation takes less than 1 second. 

   Without CONSULT

   Check air passage continuity and operation delay time under the following conditions.

   Condition	Air passage continuity between (A) and (B)	Air passage continuity between (A) and (C)
   12V direct current supply between terminals 1 and 2	Yes	No
   No supply	No	Yes

   Fig 2: Checking Air Passage Continuity

   Courtesy of NISSAN NORTH AMERICA, INC.

   Operation takes less than 1 second.