LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Body Control System (With Intelligent Key System)) >> Removal And Installation >> BCM (Body Control Module) >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove knee protector. Refer to "EXPLODED VIEW ".
  2. Remove fuse block (J/B).
  3. Remove harness clip.
  4. Remove screws.
  5. Remove BCM and disconnect the connector.
  6. Remove the ignition relay and back door lock actuator relay.
scientia non olet · About LEMON Manuals