LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Body Control System (With Intelligent Key System)) >> System Description >> Diagnosis System (BCM) >> Common Item >> COMMON ITEM: CONSULT Function (BCM - COMMON ITEM) >> Application Item
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Application Item

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.

CONSULT performs the following functions via CAN communication with BCM.

Diagnosis mode Function Description
Work Support Changes the setting for each system function.
Self Diagnostic Result Displays the diagnosis results judged by BCM.
CAN Diag Support Monitor Monitors the reception status of CAN communication viewed from BCM.
Data Monitor The BCM input/output signals are displayed.
Active Test The signals used to activate each device are forcibly supplied from BCM.
Ecu Identification The BCM part number is displayed.
Configuration
  • Read and save the vehicle specification.
  • Write the vehicle specification when replacing BCM.
scientia non olet · About LEMON Manuals