Data Monitor
WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor item [Unit] |
Description |
|---|---|
| PUSH SW [On/Off] |
Indicates [On/Off] condition of push-button ignition switch |
| ENGINE STATE [Stop/Stall/Crank/Run] |
Indicates [Stop/Stall/Crank/Run] condition of engine states |
| VEH SPEED 1 [km/h] |
Display the vehicle speed signal received from combination meter by numerical value [Km/h] |
| TURN SIGNAL R [On/Off] |
Each switch status that BCM judges from the combination switch reading function |
| TURN SIGNAL L [On/Off] |
|
| TAIL LAMP SW [On/Off] |
|
| HI BEAM SW [On/Off] |
|
| HEAD LAMP SW1 [On/Off] |
|
| HEAD LAMP SW2 [On/Off] |
|
| PASSING SW [On/Off] |
|
| AUTO LIGHT SW [On/Off] |
|
| FR FOG SW [On/Off] |
|
| DOOR SW-DR [On/Off] |
Indicated [On/Off] condition of front door switch (driver side) |
| DOOR SW-AS [On/Off] |
Indicated [On/Off] condition of front door switch (passenger side) |
| DOOR SW-RR [On/Off] |
Indicated [On/Off] condition of rear door switch RH |
| DOOR SW-RL [On/Off] |
Indicated [On/Off] condition of rear door switch LH |
| DOOR SW-BK [On/Off] |
Indicated [On/Off] condition of back door switch |
| OPTI SEN (DTCT) [V] |
The value of outside brightness voltage input from the optical sensor |
| OPTI SEN (FILT) [V] |
The value of outside brightness voltage filtered by BCM |
| OPTICAL SENSOR [On/Off] |
The sensor status input from optical sensor |