LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Body Control System (With Intelligent Key System)) >> System Description >> Diagnosis System (BCM) >> Intelligent Key >> INTELLIGENT KEY: CONSULT Function (BCM - INTELLIGENT KEY) >> Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test

WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
Test item Description
BATTERY SAVER This test is able to check interior room lamp operation
  • On: Operate
  • Off: Non-operation
OUTSIDE BUZZER This test is able to check Intelligent Key warning buzzer operation
  • On: Operate
  • Off: Non-operation
INSIDE BUZZER This test is able to check warning chime in combination meter operation
  • Take out: Take away warning chime sounds when CONSULT screen is touched
  • Key: Key warning chime sounds when CONSULT screen is touched
  • Knob: OFF position warning chime sounds when CONSULT screen is touched
INDICATOR This test is able to check warning lamp operation
  • KEY ON: "KEY" Warning lamp illuminates when CONSULT screen is touched
  • "KEY" Warning lamp blinks when CONSULT screen is touched
INT LAMP This test is able to check interior room lamp operation
  • On: Operate
  • Off: Non-operation
LCD This test is able to check meter display information
  • BP N: Engine start operation indicator lamp indicate when CONSULT screen is touched
  • BP I: Engine start operation indicator lamp indicate when CONSULT screen is touched
  • ID NG: This item is displayed, but cannot be monitored
  • ROTAT: This item is displayed, but cannot be monitored
  • SFT P: Shift P warning lamp indicate when CONSULT screen is touched
  • INSRT: This item is displayed, but cannot be monitored
  • BATT: Key warning lamp indicator when CONSULT screen is touched
  • NO KY: This item is displayed, but cannot be monitored
  • OUTKEY: Engine start operation indicator lamp indicate when CONSULT screen is touched
  • LK WN: Engine start operation indicator lamp indicate when CONSULT screen is touched
FLASHER This test is able to check security hazard lamp operation The hazard lamps are activated after "LH/RH/Off" on CONSULT screen is touched
HORN This test is able to check horn operation The horn is activated after "ON" on CONSULT screen is touched
P RANGE This test is able to check CVT shift selector power supply
  • On: Operate
  • Off: Non-operation
ENGINE SW ILLUMI This test is able to check push-ignition switch illumination operation Push-ignition switch illumination illuminates when "ON" on CONSULT screen is touched
PUSH SWITCH INDICATOR This test is able to check LOCK indicator in push-ignition switch operation LOCK indicator in push-ignition switch illuminates when "ON" on CONSULT screen is touched
TRUNK/BACK DOOR
NOTE: This item is displayed, but cannot be monitored
scientia non olet · About LEMON Manuals