DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.

NOTE:

If DTC B2110 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B2110 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2110	INTER LOCK/TRANSMISSION RANGE SW	IPDM E/R detects mismatch between the signals below for 1 second or more. Shift transmission range switch input signal	Harness or connectors Transmission range switch circuit is open or shorted Transmission range switch