LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Security Control System (Coupe)) >> DTC/Circuit Diagnosis >> DTC B2556: Push-Button Ignition Switch >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK PUSH-BUTTON IGNITION SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch harness connector.
    3. Check continuity between push-button ignition switch terminals under the following conditions.
      Push-button ignition switch Condition Continuity
      Terminal
      1 4 Pressed Yes
      Not pressed No

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals