DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
NOTE:
- If DTC B2608 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
- If DTC B2608 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. ">
| DTC No. | Trouble diagnosis name | DTC detecting condition | Possible cause |
|---|---|---|---|
| B2608 | STARTER RELAY | BCM receives starter relay ON signal (CAN) from IPDM E/R even if BCM turns the starter relay OFF |
|