LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Control System (Sedan) >> DTC/Circuit Diagnosis >> DTC C1607, C1608: Power Steering Control Module >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    >> GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    With CONSULT 

    1. Turn the ignition switch OFF to ON.
    2. Perform "EPS" self-diagnosis.

      Is DTC "C1607" or "C1608" detected? 

      YES >> Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO >> Inspection End.

scientia non olet · About LEMON Manuals