DTC Detection Logic

NOTE:

If DTC B210C is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
When IPDM E/R power supply voltage is low (Approx. 7 - 8 V for about 1 second), the DTC B210C may be detected.

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B210C	START CONT RLY OFF	When comparing the following items, a malfunction is detected for 1 second or more. Starter relay ON signal (CAN) from BCM Starter control relay conditions of contact side and coil side Transmission range switch input	IPDM E/R