DTC Detection Logic

NOTE:

If DTC B2605 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B2605 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2605	PNP/CLUTCH SW	When ignition switch is ON, N range signal input and shift position signal (CAN) input from IPDM E/R do not match.	Harness or connectors (Transmission range switch circuit is open or shorted) Transmission range switch IPDM E/R BCM