LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Cube S, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (With Intelligent Key System) >> System Description >> Diagnosis System (BCM) >> Intelligent Key >> INTELLIGENT KEY: CONSULT Function (BCM - INTELLIGENT KEY) >> Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test

Test item Description
BATTERY SAVER This test is able to check interior room lamp operation
  • On: Operate
  • Off: Non-operation
OUTSIDE BUZZER This test is able to check Intelligent Key warning buzzer operation
  • On: Operate
  • Off: Non-operation
INSIDE BUZZER This test is able to check warning chime in combination meter operation
  • Take out: Take away warning chime sounds when CONSULT screen is touched
  • Key: Key warning chime sounds when CONSULT screen is touched
  • Knob: OFF position warning chime sounds when CONSULT screen is touched
INDICATOR This test is able to check warning lamp operation
  • KEY ON: "KEY" Warning lamp illuminates when CONSULT screen is touched
  • "KEY" Warning lamp blinks when CONSULT screen is touched
INT LAMP This test is able to check interior room lamp operation
  • On: Operate
  • Off: Non-operation
LCD This test is able to check meter display information
  • BP N: Engine start operation indicator lamp indicate when CONSULT screen is touched
  • BP I: Engine start operation indicator lamp indicate when CONSULT screen is touched
  • ID NG: This item is displayed, but cannot be monitored
  • ROTAT: This item is displayed, but cannot be monitored
  • SFT P: Shift P warning lamp indicate when CONSULT screen is touched
  • INSRT: This item is displayed, but cannot be monitored
  • BATT: Key warning lamp indicator when CONSULT screen is touched
  • NO KY: This item is displayed, but cannot be monitored
  • OUTKEY: Engine start operation indicator lamp indicate when CONSULT screen is touched
  • LK WN: Engine start operation indicator lamp indicate when CONSULT screen is touched
FLASHER This test is able to check security hazard lamp operation
The hazard lamps are activated after "LH/RH/Off" on CONSULT screen is touched
HORN This test is able to check horn operation
The horn is activated after "ON" on CONSULT screen is touched
P RANGE This test is able to check CVT shift selector power supply
  • On: Operate
  • Off: Non-operation
ENGINE SW ILLUMI This test is able to check push-ignition switch illumination operation
Push-ignition switch illumination illuminates when "ON" on CONSULT screen is touched
PUSH SWITCH INDICATOR This test is able to check LOCK indicator in push-ignition switch operation
LOCK indicator in push-ignition switch illuminates when "ON" on CONSULT screen is touched
TRUNK/BACK DOOR
NOTE: This item is displayed, but cannot be monitored
scientia non olet · About LEMON Manuals