Pattern A
- Shift the transmission according to the directions below, and stay in "N" for at least 2 seconds.
- For A/T models, stop vehicle and move shift selector to "N" position with brake pedal depressed.
- For M/T models, stop vehicle and move shift selector to the neutral position with brake and clutch pedal depressed.
- Turn 4WD shift switch to "4LO" position. Stay in "4LO" for at least 2 seconds.
- Turn ignition switch "OFF".
- Start engine.
- Erase self-diagnosis. Refer to "CONSULT FUNCTION (ALL MODE AWD/4WD) ".
- Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to "CHECK 4WD SHIFT INDICATOR PATTERN ".
If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.