Input Signal And Output Signal
Major signal transmission between each unit via communication lines is shown in the following table.
| Component |
Signal description |
| Yaw rate/side/decel G sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line.
- Yaw rate signal
- Side G sensor signal
- Decel G sensor signal
|
| ECM |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- Accelerator pedal position signal
- Engine speed signal
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
- Target throttle position signal
|
| TCM |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- N range signal
- P range signal
- R range signal
- Current gear position signal
|
| AWD control module |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
|
| Steering angle sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- Steering angle sensor signal
|
| Combination meter |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- Brake fluid level switch signal
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
- VDC warning lamp signal
- VDC OFF indicator lamp signal
|