LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Juke SL, FWD, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing, Periodic Maintenance And Removal And Installation >> Clutch Pedal Position Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FOR CLUTCH PEDAL POSITION SWITCH FUNCTION 
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector and ground.
      ECM Condition Voltage (Approx.)
      Connector + -
      Terminal
      E18 108 127 Clutch pedal Slightly depressed Battery voltage
      Fully released 0V

      Is the inspection result normal? 

      YES: INSPECTION END.

      NO: Proceed to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals