System Description
IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.
CAUTION:
IPDM E/R integrated relays cannot be removed.
| Control relay | Input/output | Transmit unit | Control part | Reference | ||
|---|---|---|---|---|---|---|
| Headlamp low relay | Low beam request signal | BCM (CAN) | Headlamp low | HEADLAMP (LO) CIRCUIT (xenon type) HEADLAMP (LO) CIRCUIT (halogen type) | ||
| Headlamp high relay | High beam request signal | BCM (CAN) | Headlamp high | HEADLAMP (HI) CIRCUIT (xenon type) HEADLAMP (HI) CIRCUIT (halogen type) | ||
| Front fog lamp relay (if equipped) | Front fog light request signal | BCM (CAN) | Front fog lamp (if equipped) | FRONT FOG LAMP CIRCUIT (xenon type) FRONT FOG LAMP CIRCUIT (halogen type) | ||
| Tail lamp relay | Position light request signal | BCM (CAN) |
|
PARKING LAMP CIRCUIT (xenon type) PARKING LAMP CIRCUIT (halogen type) | ||
|
Front wiper request signal | BCM (CAN) | Front wiper | FRONT WIPER MOTOR LO CIRCUIT | ||
| Front wiper auto stop signal | Front wiper motor | |||||
|
Starter control relay signal | BCM (CAN) | Starter motor | SYSTEM DESCRIPTION , | ||
| Starter relay control signal | TCM | |||||
| A/C relay | A/C compressor request signal | ECM (CAN) | A/C compressor (magnet clutch) | MAGNET CLUTCH (with color display) or MAGNET CLUTCH (with monochrome display) | ||
| Ignition relay - 1 | Ignition switch ON signal | BCM (CAN) | Ignition relay - 1 | SYSTEM DESCRIPTION | ||
| Vehicle speed signal | Combination meter (CAN) | |||||
| Push-button ignition switch | Push-button ignition switch | |||||
| Fuel pump relay | Fuel pump request signal | ECM | Fuel level sensor unit and fuel pump (fuel pump) | FUEL PUMP | ||
| ECM relay | ECM relay control signal | ECM | ECM relay | POWER SUPPLY AND GROUND CIRCUIT | ||
| Throttle control motor relay | Throttle control motor relay signal | ECM | Throttle control motor relay | P2100, P2103 THROTTLE CONTROL MOTOR RELAY | ||
| Cooling fan relay - 1 | Cooling fan request signal | ECM (CAN) | Cooling fan relay - 1 | COOLING FAN | ||
|
||||||