AROUND VIEW MONITOR CONTROL UNIT: Diagnosis Procedure

CHECK FUSE

Check for blown fuses.

Power source	Fuse No.
Battery	6

Is inspection result normal?

YES: GO TO 2.

NO: Be sure to eliminate cause of malfunction before installing new fuse.

CHECK POWER SUPPLY CIRCUITS

Check voltage between around view monitor control unit harness connector and ground.

Signal name	Connector	Terminal	Ignition switch position	Value (Approx.)
Battery power supply	M253	2	OFF	Battery voltage

Is inspection result normal?

YES: GO TO 3.

NO: Check harness between around view monitor control unit and fuse.

CHECK GROUND CIRCUIT

Check continuity between around view monitor control unit harness connector and ground.

Signal name	Connector	Terminal	Ignition switch position	Continuity
Ground	M253	1	OFF	Existed

Is inspection result normal?

YES: INSPECTION END

NO: Repair harness or connector.