DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press push-button ignition switch (push switch) under the following conditions, and wait for 1 second or more.
- Shift position is in the P position
- Do not depress brake pedal
- Check "Self-diagnosis result" of BCM with CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Press push-button ignition switch (push switch) under the following conditions, and wait for 1 second or more.