DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If DTC B2605 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B2605 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

DTC DETECTING CONDITION AND POSSIBLE CAUSES

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2605	PNP/CLUTCH SW	When ignition switch is ON, P/N position signal input from TCM and P/N position signal input (CAN) from IPDM E/R do not match.	Harness or connectors (CAN communication line is open or shorted.) Harness or connectors (TCM circuit is open or shorted.) TCM IPDM E/R BCM