Audio Function

The audio system is equipped with the following functions.

Operating Signal

Audio system operation can be performed with multifunction switch, preset switch, or steering switch.

Operating signal is transmitted to AV control unit with AV communication when it is operated by multifunction switch or preset switch.
The disk eject signal is transmitted to AV control unit by hardwire, when disk eject switch is operated.
Operating signal is transmitted to AV control unit with steering switch signal when it is operated by steering switch.
Operation status of audio is indicated at front display by RGB image signal, RGB area signal, and RGB image synchronizing signal.

AM/FM Radio Function

AM/FM radio tuner is built into AV control unit.
AM/FM radio wave is received by radio antenna, next it is amplified by antenna amp., and finally it is input to AV control unit.
FM radio wave is received by FM sub antenna, and it is transmitted to the AV control unit directly.
AV control unit outputs audio signal to each speaker.

Satellite Radio Mode

Satellite radio tuner is controlled by communication signal and request signal with AV control unit.
Sound signal (satellite radio) is received by satellite radio antenna and transmitted to AV control unit via satellite radio tuner.
AV control unit outputs audio signal (satellite radio) to each speaker.

CD Mode

CD function is built into AV control unit.
AV control unit outputs audio signal to each speaker when CD is inserted to AV control unit.
For further information about CD function specifications, refer to "AV CONTROL UNIT ".

USB Connection Function

Connecting iPod® or USB memory allows the driver to play iPod® music files or USB memory-stored music files.
Sound signals of music files stored in iPod® or USB memory is transmitted from the USB connector to the AV control unit.
AV control unit outputs sound signal to each speaker.
iPod® is recharged when connected to USB connector.

Compliant USB memory and data recorded are limited.

NOTE: