AV Control Unit: Description: Notes
- The AV control unit is equipped with the following parts. It is the master unit integrated with functions and controls the multi-AV system.
Units equipped HDD (hard disk drive) AM/FM electronic tuner Satellite radio tuner CD/DVD drive USB interface Bluetooth® module - Signals necessary for the vehicle information display function are received from ECM and the combination meter via CAN communication.
- Signals necessary for vehicle setting functions are sent and received with BCM via CAN communication.
- It inputs the signal for driving status recognition (vehicle speed signal, reverse signal, and parking brake signal).
- A possible route line is generated on the camera image from the rear view camera, and it is shown on the display.
- The AV control unit contains an HDD with map data and sensors used for automatic location calculation, i.e. a gyroscope (angular velocity sensor) and a G sensor.
- HDD
- The AV control unit records map data, traffic regulations data, and guidance information.
- Gyroscope
- Detects vehicle cornering condition.
- Acceleration sensor
- Detects the inclination angle and height variation of the vehicle.
NOTE:
For details of each functions, refer to
"MULTI AV SYSTEM: SYSTEM DESCRIPTION ".
HDD
The adoption of a fast high-capacity 40 GB HDD improves the navigation performance.
AM/FM Electronic Tuner
The adoption of the PLL frequency synthesizer system enables the signal outputting with accurate frequencies.
Satellite Radio Tuner
- The adoption of the PLL frequency synthesizer system enables the signal outputting with accurate frequencies.
- Receives satellite radio antenna signal and converts it into the sound signal and data signal.
- It outputs sound signal to BOSE amp. and outputs data signal to front display unit.
CD/DVD drive
- It is CD-R/CD-RW compliant and enables MP3, WMA, and AAC files to play music.
- It displays the artist name, album title or song title recorded to the file by the ID3 tag/WMA tag/AAC tag display function.
- DVD playback function is equipped.
USB Interface
- Music can be played by connecting an iPod® or USB memory.
Bluetooth® Module
- Wireless connection to the audio device equipped with Bluetooth® communication can play music.
- Once a Bluetooth® communication compliant phone has been registered in the AV control unit, hands-free phone communication can be carried out without connecting the cellular phone to the TEL harness.
- Five units of Bluetooth® communication devices including audio devices and cellular phones can be registered to the AV control unit.