USB Connection Function
- Connecting iPod® or USB memory allows the driver to play iPod® music files or USB memory-stored music files, video data, and image viewer data.
- Sound signals of music files stored in iPod® or USB memory are transmitted from the USB connector to the AV control unit. The AV control unit transmits the sound signals to the BOSE amp. and video distributor.
- Sound signals transmitted from the BOSE amp. to woofer and each speaker, and sound signals transmitted to headphone via rear display unit
- Video signals and image viewer file signals are transmitted from the USB connector to the AV control unit. The data and files are displayed on the front display unit screen.
- Video signals are transmitted from the USB connector to the AV control unit. The data and files are displayed on the rear display unit screen.
- iPod® is recharged when connected to USB connector.
- Compliant USB memory and data recorded are limited.
USB memory USB2.0 File system FAT16 FAT32 - Only files that meet the following conditions will be played.
Music file Video file Image viewer file File format "MP3", "WMA", "AAC", "M4A" "DivX", "MPEG4 (ASF)" "JPEG" File extension ".mp3", ".wma", ".aac", ".m4a" ".divx", ".afs", ".avi" ".jpg", ".jpeg" Maximum file size 2 GB 2 GB 2 MB
NOTE:
- iPod® is a trademark of Apple inc., registered in the U.S. and other countries.
- Image signals cannot be received from iPod®.
- Use the enclosed USB harness when connecting iPod® to USB connector.
- If a video-sound codec combination is not satisfied, its video file may not be played.
- Signals cannot be transmitted to video distributor under the following conditions:
- Only sound signal or only image viewer data is stored in iPod®
- Only sound signal or only image viewer data is stored in USB memory