EXIT ASSIST FUNCTION: System Description: Description
- This function slides driver seat toward vehicle rear and facilitates entry/exit of the vehicle.
- Seat slide set amount of exit assist function is adjustable.
- When driver side door is open while operation conditions are satisfied, driver seat control unit receives front door switch (driver side) signal (open/close) from BCM via CAN communication. Driver seat control unit operates sliding motor and moves driver seat toward vehicle rear to the seat slide set amount when driver seat control unit detects that driver side door is open.
- Driver seat control unit receives sliding sensor position signal from sliding sensor. Driver seat control unit stops the operation of sliding motor when driver seat control unit detects that driver seat is slid to the seat slide set amount.
NOTE:
- This function is set to ON before delivery (initial setting).
- Further information for the system setting procedure. Refer to "DESCRIPTION ".
Operation Condition
Satisfy all of the following items. The exit assist function is not performed if these items are not satisfied.
| Item | Request status |
|---|---|
| Ignition position | OFF |
| System setting (Entry/exit assist function) | ON |
| Initialization | Done |
Switch inputs
|
OFF (Not operated) |
| CVT shift selector | P position |
| Handle position | LHD |
| Transmission | CVT |
| CONSULT | Not connected |