LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Quest SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Power Control System) >> IPDM E/R >> System Description >> Diagnosis System (IPDM E/R) >> CONSULT Function (IPDM E/R) >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Monitor item

DATA MONITOR REFERENCE CHART

Monitor Item [Unit] MAIN SIGNALS Description
MOTOR FAN REQ [1/2/3/4] x Displays the value of the cooling fan speed signal received from ECM via CAN communication.
AC COMP REQ [Off/On] x Displays the status of the A/C compressor request signal received from ECM via CAN communication.
TAIL&CLR REQ [Off/On] x Displays the status of the position light request signal received from BCM via CAN communication.
HL LO REQ [Off/On] x Displays the status of the low beam request signal received from BCM via CAN communication.
HL HI REQ [Off/On] x Displays the status of the high beam request signal received from BCM via CAN communication.
FR FOG REQ [Off/On] x Displays the status of the front fog light request signal received from BCM via CAN communication.
FR WIP REQ [Stop/1LOW/Low/Hi] x Displays the status of the front wiper request signal received from BCM via CAN communication.
WIP AUTO STOP [STOP P/ACT P] x Displays the status of the front wiper stop position signal judged by IPDM E/R.
WIP PROT [Off/BLOCK] x Displays the status of the front wiper fail-safe operation judged by IPDM E/R.
IGN RLY1 -REQ [Off/On]   Displays the status of the ignition switch ON signal received from BCM via CAN communication.
IGN RLY [Off/On] x Displays the status of the ignition relay judged by IPDM E/R.
PUSH SW [Off/On]   Displays the status of the push-button ignition switch judged by IPDM E/R.
INTER/NP SW [Off/On]   Displays the status of the shift position judged by IPDM E/R.
ST RLY CONT [Off/On]   Displays the status of the starter relay status signal received from BCM via CAN communication.
IHBT RLY-REQ [Off/On]   Displays the status of the starter control relay signal received from BCM via CAN communication.
ST/INHI RLY [Off/ ST /INHI/UNKWN]   Displays the status of the starter relay and starter control relay judged by IPDM E/R.
DETENT SW [Off/On]   Displays the status of the CVT shift selector (detention switch) judged by IPDM E/R.
S/L RLY-REQ [Off/On]  
NOTE: The item is indicated, but not monitored.
S/L STATE [LOCK/UNLK/UNKWN]  
NOTE: The item is indicated, but not monitored.
DTRL REQ [Off/On]   Displays the status of the daytime running light request signal received from BCM via CAN communication.
NOTE: This item is monitored only on the vehicle with daytime running light system.
OIL P SW [Open/Close]   Displays the status of the oil pressure switch judged by IPDM E/R.
HOOD SW [Off/On]  
NOTE: The item is indicated, but not monitored.
HL WASHER REQ [Off/On]  
NOTE: The item is indicated, but not monitored.
THFT HRN REQ [Off/On]   Displays the status of the theft warning horn request signal received from BCM via CAN communication.
HORN CHIRP [Off/On]   Displays the status of the horn reminder signal received from BCM via CAN communication.
CRNRNG LMP REQ [Off/On]  
NOTE: The item is indicated, but not monitored.
scientia non olet · About LEMON Manuals