DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press push-button ignition switch for 1 second under the following condition.
- Selector lever: In the P position
- Brake pedal: Not depressed
- Release push-button ignition switch and wait 1 second.
- Check DTC in "Self diagnostic result" mode of "BCM" using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE "
NO: INSPECTION END
- Press push-button ignition switch for 1 second under the following condition.