LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Quest SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Control System - Component Testing) >> Fuel Injector >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUEL INJECTOR
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as per the following.
      TERMINALS RESISTANCE REFERENCE CHART

      Terminals Resistance
      1 and 2 11.1 - 14.5 Ω [at 10 - 60°C (50 - 140°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector. Refer to "EXPLODED VIEW ".

      Fig 1: Checking Resistance Between Fuel Injector Terminals
      G04875480Courtesy of NISSAN MOTOR CO., U.S.A.