Test Item
ABS SOLENOID VALVE
- Select "Up", "Keep" and "Down" of "ACTIVE TEST" in "ABS" with CONSULT. Then use screen monitor to check that solenoid valve operates as shown in solenoid valve operation chart.
| Test item | Display item | Display | ||||
|---|---|---|---|---|---|---|
| Up | Keep | Down | ||||
| FR RH SOL | FR RH IN SOL | Off | On | On | ||
| FR RH OUT SOL | Off | Off | On(1) | |||
| FR LH SOL | FR LH IN SOL | Off | On | On | ||
| FR LH OUT SOL | Off | Off | On(1) | |||
| RR RH SOL | RR RH IN SOL | Off | On | On | ||
| RR RH OUT SOL | Off | Off | On(1) | |||
| RR LH SOL | RR LH IN SOL | Off | On | On | ||
| RR LH OUT SOL | Off | Off | On(1) | |||
|
||||||
ABS MOTOR
- Select "On" and "Off" of "ACTIVE TEST" in "ABS" with CONSULT on screen. Make sure motor relay and actuator relay operates as shown in table below.
| Test item | Display item | Display | |
|---|---|---|---|
| On | Off | ||
| ABS MOTOR | MOTOR RELAY | On | Off |
| ACTUATOR RLY (Note) | On | On | |
NOTE:
A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking.