| P0340 |
CMP SEN/CIRC-B1 (Camshaft position sensor "A" circuit bank 1) |
- The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
- The cylinder No. signal is not sent to ECM during engine running.
- The cylinder No. signal is not in the normal pattern during engine running.
|
- Harness or connectors (Camshaft position sensor circuit is open or shorted)
- Camshaft position sensor
- Camshaft (Intake)
- Starter motor
- Starting system circuit
- Dead (Weak) battery
- Sensor power supply 2 circuit
|