LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Sentra FE+SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Body Control System (Without Intelligent Key System)) >> Removal And Installation >> BCM (Body Control Module) >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:
  • When replacing BCM, perform "WRITE CONFIGURATION". Refer to DESCRIPTION .
  • When replacing BCM, perform the system initialization (NATS). Refer to DESCRIPTION .
  • When replacing BCM, if new BCM does not come with keyfobs attached, all existing keyfobs must be re-registered. Refer to the CONSULT immobilizer mode and follow the on screen instructions.
  • For initialization and registration of ignition keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
scientia non olet · About LEMON Manuals