Data Monitor
WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor Item [Unit] | Description |
|---|---|
| PUSH SW [On/Off] | Indicates condition of push-button ignition switch. |
| ENGINE STATE [Stop/Stall/Crank/Run] | Indicates engine status received from ECM on CAN communication line. |
| VEH SPEED 1 [km/h] | Indicates vehicle speed signal received from ABS on CAN communication line. |
| TURN SIGNAL R [On/Off] | Indicates condition of combination switch. |
| TURN SIGNAL L [On/Off] | |
| TAIL LAMP SW [On/Off] | |
| HI BEAM SW [On/Off] | |
| HEAD LAMP SW 1 [On/Off] | |
| HEAD LAMP SW 2 [On/Off] | |
| PASSING SW [On/Off] | |
| AUTO LIGHT SW [On/Off] | |
| FR FOG SW [On/Off] | |
| DOOR SW-DR [On/Off] | Indicates condition of front door switch LH. |
| DOOR SW-AS [On/Off] | Indicates condition of front door switch RH. |
| DOOR SW-RR [On/Off] | Indicates condition of rear door switch RH. |
| DOOR SW-RL [On/Off] | Indicates condition of rear door switch LH. |
| DOOR SW-BK [On/Off] | Indicates condition of trunk switch. |
| OPTI SEN (DTCT) [V] | Indicates outside brightness voltage signal from optical sensor. |
| OPTI SEN (FILT) [V] | Indicates outside brightness voltage signal from optical sensor filtered by BCM. |
| OPTICAL SENSOR [On/Off] | Indicates condition of optical sensor. |