LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Sentra S, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes & Symptom Tests) >> DTC/Circuit Diagnosis >> DTC P0500: VSS >> Except For M/T Models >> EXCEPT FOR M/T MODELS: Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EXCEPT FOR M/T MODELS: Diagnosis Procedure

  1. CHECK DTC WITH TCM 

    Check DTC with TCM. Refer to "CONSULT FUNCTION ".

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Perform trouble shooting relevant to DTC indicated. Refer to "DTC INDEX ".

  2. CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) 

    Check DTC with ABS actuator and electric unit (control unit). Refer to "CONSULT FUNCTION (ABS) ".

    Is the inspection result normal? 

    YES: GO TO 3.

    NO: Perform trouble shooting relevant to DTC indicated. Refer to "DTC INDEX ".

  3. CHECK DTC WITH COMBINATION METER 

    Check DTC with combination meter. Refer to "CONSULT FUNCTION (METER/M&A) ".

    Is the inspection result normal? 

    YES: GO TO 4.

    NO: Perform trouble shooting relevant to DTC indicated. Refer to "DTC INDEX ".

  4. CHECK OUTPUT SPEED SENSOR 

    Check output speed sensor. Refer to "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal? 

    YES: GO TO 5.

    NO: Replace or replace error-detected parts.

  5. CHECK WHEEL SENSOR 

    Check wheel sensor. Refer to "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal? 

    YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

    NO: Replace or replace error-detected parts.