LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Sentra S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Body Control System (Without Intelligent Key System)) >> Removal And Installation >> BCM (Body Control Module) >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. Refer to REMOVAL AND INSTALLATION (BATTERY) .
  2. Remove instrument lower panel LH and instrument side finisher LH. Refer to REMOVAL AND INSTALLATION .
  3. Remove fuse block (J/B) screws (A) and position (BCM) aside.
    G08991638Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove harness clip (A).
    G08991639Courtesy of NISSAN NORTH AMERICA, INC.
  5. Remove the screws (A) from the BCM (1).
    G08991640Courtesy of NISSAN NORTH AMERICA, INC.
  6. Disconnect the harness connectors and remove the BCM.
scientia non olet · About LEMON Manuals