LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Sentra SL >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 38 (Security Control System (Without Intelligent Key System) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B210B: Starter Control Relay >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn ignition switch under the following conditions to start engine, and wait 1 second or more.
      • Selector lever: In the P position
      • Brake pedal: Depressed
    2. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.

    Is DTC detected?

    YES 

    Go to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.

scientia non olet · About LEMON Manuals