LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Security Control System (With Intelligent Key System) (DTCS)) >> DTC/Circuit Diagnosis >> DTC B260F: Engine Status >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

  1. INSPECTION START

    1. Turn ignition switch ON.
    2. Select Self Diagnostic Result mode of BCM using CONSULT.
    3. Touch ERASE.
    4. Perform DTC CONFIRMATION PROCEDURE for DTC B260F. Refer to DTC LOGIC .

    Is DTC detected?

    YES 

    GO TO STEP 2  .

    NO 

    Inspection End.

  2. REPLACE ECM

    1. Replace ECM.

      Refer to REMOVAL AND INSTALLATION (MRA8DE) or REMOVAL AND INSTALLATION (MR16DDT).

    2. Perform "ADDITIONAL SERVICE WHEN REPLACING ECM".

      Refer to WORK PROCEDURE (MRA8DE) or WORK PROCEDURE (MR16DDT).

    Inspection End.

scientia non olet · About LEMON Manuals