LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Security Control System (With Intelligent Key System) (DTCS)) >> DTC/Circuit Diagnosis >> DTC B261F: ASCD Clutch Switch >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B261F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B261F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .
DTC No. CONSULT screen items
(Trouble diagnosis content)		 DTC detecting condition Possible cause
B261F ASCD CNCL/CLTCH SW
(ASCD cancel/clutch switch)		 BCM detects the following status for 10 seconds 3 times
  • Clutch pedal position switch input: 0 V
  • Vehicle speed: 40 km/h (24.8 MPH) or more
  • Harness or connectors.

    (CAN communication line is open or shorted.)

  • Harness or connectors.

    (Clutch pedal position switch circuit is open or shorted)

  • Clutch pedal position switch
  • Combination meter
  • BCM
scientia non olet · About LEMON Manuals