DTC Confirmation Procedure
WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.
CVT models
- Selector lever: In the Park (P) position
- Brake pedal: Not depressed
M/T models
- Shift lever: in the neutral position
- Clutch pedal: Not depressed
- Check DTC in Self Diagnostic Result mode of BCM using CONSULT.
Is DTC detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
Inspection End.
- Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.