DTC Detection Logic

NOTE: If DTC B2110 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B210F	INTRLCK/PNP SW OFF	IPDM E/R detects a difference between the following signals P/N position signal from transmission range switch and P/N position signal (CAN) from BCM	Harness or connectors (The CAN communication line is open or shorted.) Harness or connectors (Transmission range switch circuit is open or shorted.) Transmission range switch IPDM E/R BCM