Active Test Mode
CAUTION:
- Do not perform active test while driving vehicle.
- Make sure to completely bleed air from brake system.
- The active test cannot be performed with the ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp or brake warning lamp on.
- ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp turn on during active test.
NOTE:
- When active test is performed while depressing the pedal, the pedal depression amount will change. This is normal.
- "TEST IS STOPPED" is displayed 10 seconds after operation start.
- After "TEST IS STOPPED" is displayed, to perform test again, touch BACK.
Test Item
ABS SOLENOID VALVE
- Select "Up", "Keep" and "Down". Then use screen monitor to check that solenoid valve operates as shown in the table below.
| Test item | Display item | Display ((2)) | ||||||
|---|---|---|---|---|---|---|---|---|
| Up | Keep | Down | ||||||
| FR RH SOL | FR RH IN SOL | Off | On | On | ||||
| FR RH OUT SOL | Off | Off | On(1) | |||||
| USV[FR-RL] | Off | Off | Off | |||||
| HSV[FR-RL] | Off | Off | Off | |||||
| FR LH SOL | FR LH IN SOL | Off | On | On | ||||
| FR LH OUT SOL | Off | Off | On(1) | |||||
| USV[FL-RR] | Off | Off | Off | |||||
| HSV[FL-RR] | Off | Off | Off | |||||
| RR RH SOL | RR RH IN SOL | Off | On | On | ||||
| RR RH OUT SOL | Off | Off | On(1) | |||||
| USV[FL-RR] | Off | Off | Off | |||||
| HSV[FL-RR] | Off | Off | Off | |||||
| RR LH SOL | RR LH IN SOL | Off | On | On | ||||
| RR LH OUT SOL | Off | Off | On(1) | |||||
| USV[FR-RL] | Off | Off | Off | |||||
| HSV[FR-RL] | Off | Off | Off | |||||
NOTE:
|
||||||||
ABS SOLENOID VALVE (ACT)
- Select "Up", "ACT UP" and "ACT KEEP". Then use screen monitor to check that solenoid valve operates as shown in the table below.
| Test item | Display item | Display ((2)) | ||||||
|---|---|---|---|---|---|---|---|---|
| Up | ACT UP | ACT KEEP | ||||||
| FR RH ABS SOLENOID (ACT) | FR RH IN SOL | Off | Off | Off | ||||
| FR RH OUT SOL | Off | Off | Off | |||||
| USV[FR-RL] | Off | On | On | |||||
| HSV[FR-RL] | Off | On(1) | Off | |||||
| FR LH ABS SOLENOID (ACT) | FR LH IN SOL | Off | Off | Off | ||||
| FR LH OUT SOL | Off | Off | Off | |||||
| USV[FL-RR] | Off | On | On | |||||
| HSV[FL-RR] | Off | On(1) | Off | |||||
| RR RH ABS SOLENOID (ACT) | RR RH IN SOL | Off | Off | Off | ||||
| RR RH OUT SOL | Off | Off | Off | |||||
| USV[FL-RR] | Off | On | On | |||||
| HSV[FL-RR] | Off | On(1) | Off | |||||
| RR LH ABS SOLENOID (ACT) | RR LH IN SOL | Off | Off | Off | ||||
| RR LH OUT SOL | Off | Off | Off | |||||
| USV[FR-RL] | Off | On | On | |||||
| HSV[FR-RL] | Off | On(1) | Off | |||||
NOTE:
|
||||||||
ABS MOTOR
- Select "On" and "Off". Make sure motor relay and actuator relay operates as shown in table below.
| Test item | Display item | Display | |||
|---|---|---|---|---|---|
| On | Off | ||||
| ABS MOTOR | MOTOR RELAY | On | Off | ||
| ACTUATOR RLY ((1)) | On | On | |||
|
NOTE:
|
|||||