Component Function Check

With CONSULT 

1. Turn ignition switch ON.
2. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT.
3. Touch "LOW" and "Hi" on the CONSULT screen.
4. Check that cooling fan operates.
   NOTE: The cooling fan operates at high speeds even when "LOW" is selected in CONSULT "ACTIVE TEST". (For single connector cooling fan without A/C models)

Without CONSULT 

1. Perform IPDM E/R auto active test and check cooling fan motor operation. Refer to "DIAGNOSIS DESCRIPTION ".
2. Check that cooling fan operates.

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Refer to "DIAGNOSIS PROCEDURE ".