| FR LH SENSOR |
Wheel speed |
Vehicle stopped |
0 [km/h (MPH)] |
| Vehicle running () |
Nearly matches the speedometer display (± 10% or less) |
| FR RH SENSOR |
Wheel speed |
Vehicle stopped |
0 [km/h (MPH)] |
| Vehicle running () |
Nearly matches the speedometer display (± 1% or less) |
| RR LH SENSOR |
Wheel speed |
Vehicle stopped |
0 [km/h (MPH)] |
| Vehicle running () |
Nearly matches the speedometer display (± 10% or less) |
| RR RH SENSOR |
Wheel speed |
Vehicle stopped |
0 [km/h (MPH)] |
| Vehicle running () |
Nearly matches the speedometer display (± 10% or less) |
| FR RH IN SOL |
Operation status of each solenoid valve |
Actuator (solenoid valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When the actuator (solenoid valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| FR RH OUT SOL |
Operation status of each solenoid valve |
Actuator (solenoid valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When the actuator (solenoid valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| FR LH IN SOL |
Operation status of each solenoid valve |
Actuator (solenoid valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When the actuator (solenoid valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| FR LH OUT SOL |
Operation status of each solenoid valve |
Actuator (solenoid valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When the actuator (solenoid valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| RR RH IN SOL |
Operation status of each solenoid valve |
Actuator (solenoid valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When the actuator (solenoid valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| RR RH OUT SOL |
Operation status of each solenoid valve |
Actuator (solenoid valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When the actuator (solenoid valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| RR LH IN SOL |
Operation status of each solenoid valve |
Actuator (solenoid valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When the actuator (solenoid valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| RR LH OUT SOL |
Operation status of each solenoid valve |
Actuator (solenoid valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When the actuator (solenoid valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| STOP LAMP SW |
Stop lamp switch signal status |
When brake pedal is depressed |
On |
| When brake pedal is not depressed |
Off |
| MOTOR RELAY |
Motor and motor relay operation |
When the motor relay and motor are operating |
On |
| When the motor relay and motor are not operating |
Off |
| ACTUATOR RLY () |
Actuator relay operation |
When the actuator relay is operating |
On |
| When the actuator relay is not operating |
Off |
| ABS WARN LAMP |
ABS warning lamp () |
When ABS warning lamp is ON |
On |
| When ABS warning lamp is OFF |
Off |
| OFF LAMP |
VDC OFF indicator lamp () |
When VDC OFF indicator lamp is ON |
On |
| When VDC OFF indicator lamp is OFF |
Off |
| OFF SW |
VDC OFF switch ON/OFF |
VDC OFF switch ON (When VDC OFF indicator lamp is ON) |
On |
| VDC OFF switch OFF (When VDC OFF indicator lamp is OF) |
Off |
| SLIP/VDC LAMP |
VDC warning lamp () |
When VDC warning lamp is ON |
On |
| When VDC warning lamp is OFF |
Off |
| BATTERY VOLT |
Battery voltage supplied to the ABS actuator and electric unit (control unit) |
Ignition switch ON |
10 - 16 V |
| YAW RATE SEN |
Yaw rate detected by yaw rate/side G sensor |
Vehicle stopped |
Approx. 0 d/s |
| Turning right |
Negative value |
| Turning left |
Positive value |
| ACCEL POS SIG |
Throttle actuator opening/closing is displayed (linked with accelerator pedal) |
Accelerator pedal not depressed (ignition switch is ON) |
0 % |
| Depress accelerator pedal (ignition switch is ON) |
0 - 100 % |
| SIDE G-SENSOR |
Transverse G detected by side G sensor |
Vehicle stopped |
Approx. 0 m/s2 |
| Turning right |
Negative value |
| Turning left |
Positive value |
| STR ANGLE SIG |
Steering angle detected by steering angle sensor |
Driving straight |
±2.5° |
| Turn 90° to right |
Approx. +90° |
| Turn 90° to left |
Approx. -90° |
| PRESS SENSOR |
Brake fluid pressure detected by pressure sensor |
With ignition switch turned ON and brake pedal released |
Approx. 0 bar |
| With ignition switch turned ON and brake pedal depressed |
--40 to 300 bar |
| EBD SIGNAL |
EBD operation |
EBD is active |
On |
| EBD is inactive |
Off |
| ABS SIGNAL |
ABS operation |
ABS is active |
On |
| ABS is inactive |
Off |
| TCS SIGNAL |
TCS operation |
TCS is active |
On |
| TCS is inactive |
Off |
| VDC SIGNAL |
VDC operation |
VDC is active |
On |
| VDC is inactive |
Off |
| EBD FAIL SIG |
EBD fail-safe signal |
In EBD fail-safe |
On |
| EBD is normal |
Off |
| ABS FAIL SIG |
ABS fail-safe signal |
In ABS fail-safe |
On |
| ABS is normal |
Off |
| TCS FAIL SIG |
TCS fail-safe signal |
In TCS fail-safe |
On |
| TCS is normal |
Off |
| VDC FAIL SIG |
VDC fail-safe signal |
In VDC fail-safe |
On |
| VDC is normal |
Off |
| CRANKING SIG |
Crank operation |
Crank is active |
On |
| Crank is inactive |
Off |
| FLUID LEV SW |
Brake fluid level switch signal status |
When brake fluid level switch ON |
On |
| When brake fluid level switch OFF |
Off |
| PARK BRAKE SW |
Parking brake switch signal status |
Parking brake switch is active |
On |
| Parking brake switch is inactive |
Off |
| USV[FL-RR] () |
VDC switch-over valve |
When actuator (switch-over valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When actuator (switch-over valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| USV[FR-RL] () |
VDC switch-over valve |
When actuator (switch-over valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When actuator (switch-over valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| HSV[FL-RR] () |
VDC switch-over valve |
When actuator (switch-over valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When actuator (switch-over valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| HSV[FR-RL] () |
VDC switch-over valve |
When actuator (switch-over valve) is active ("ACTIVE TEST" with CONSULT) |
On |
| When actuator (switch-over valve) is not active and actuator relay is active (ignition switch ON) |
Off |
| V/R OUTPUT () |
Solenoid valve relay activated |
When the solenoid valve relay is active (When ignition switch OFF) |
On |
| When the solenoid valve relay is not active (in the fail-safe mode) |
Off |
| M/R OUTPUT |
Actuator motor and motor relay activated |
When the actuator motor and motor relay are active |
("ACTIVE TEST" with CONSULT) |
| On When the actuator motor and motor relay are inactive |
Off |
| ENGINE RPM |
With engine running |
With engine stopped |
0 [tr/min (rpm)] |
| Engine running |
Almost in accordance with tachometer display |