Work Procedure

Perform the camera aiming adjustment with CONSULT. Refer to "DESCRIPTION ".

: GO TO 2.

Perform the self-diagnosis of rear view camera with CONSULT. Check if any DTC is detected.

Is any DTC detected? 

YES: Perform the trouble diagnosis for the detected DTC. Refer to "DTC INDEX ".

NO: GO TO 3.

1. Perform the LDW/BSW system action test. Refer to "DESCRIPTION ".
2. Check that the LDW/BSW system operates normally.

   Is the inspection result normal? 

   YES: Inspection End.

   NO: GO TO 4.

1. Perform WASH ACTIVE on Active Test using CONSULT.
2. Perform air and washer tube connection check by AIR & WASH ACTIVE on Active Test:
   1. Washer fluid output count on the rear view camera is 3 to 5 times → OK
   2. Washer fluid output count on the rear view camera is 10 times → Check tube with yellow marking
   3. Washer fluid output count on the rear view camera is 1 time → Check tube with green marking
   4. No washer fluid output → Check tube with blue marking or check valve

      : Inspection End.