| ST ANGLE SENSOR SIGNAL |
Ignition switch ON |
Steering angle signal is received |
On |
| Steering angle signal is not received |
Off |
| REVERSE SIGNAL |
Ignition switch ON |
Shift selector in R (reverse) |
On |
| Shift selector is not in R (reverse) |
Off |
| VEHICLE SPEED SIGNAL |
While driving |
Vehicle speed signal is received |
On |
| Vehicle speed signal is not received |
Off |
| CAMERA SWITCH SIGNAL |
Ignition switch ON |
Camera switch is pressed |
On |
| Camera switch is not pressed |
Off |
| CAMERA OFF SIGNAL |
Ignition switch ON |
Purpose switch is pressed |
On |
| Purpose switch is not pressed |
Off |
| ST ANGLE SENSOR TYPE |
Ignition switch ON |
Steering angle sensor type is displayed |
Absolute |
| Steering angle sensor type is not received |
Not |
| STEERING GEAR RATIO TYPE |
Ignition switch ON |
Pattern 1 type of steering gear ratio displayed |
Pattern 1 |
| Pattern 2 type of steering gear ratio displayed |
Pattern 2 |
| STEERING POSITION |
Ignition switch ON |
It recognizes steering position is left |
LHD |
| It recognizes steering position is right |
RHD |
| R-CAMERA COMM STATUS |
Ignition switch ON |
Rear camera serial status is OK |
OK |
| Rear camera serial status is not OK |
NG |
| R-CAMERA COMM LINE |
Ignition switch ON |
Rear camera serial communication signal is received |
OK |
| Rear camera serial communication signal is not received |
NG |
| ILL |
Ignition switch ON |
Illumination is ON |
On |
| Illumination is OFF |
Off |
| ITS SW 1 |
Ignition switch ON |
ITS switch is pressed |
On |
| ITS switch is not pressed |
Off |
| ITS SW 1 IND |
Ignition switch ON |
Indicator of ITS switch 1 is lighting |
On |
| Indicator of ITS switch 1 is not lighting |
Off |
| TURN SIGNAL |
Ignition switch ON |
Turn signal left is received |
Left |
| Turn signal neutral is received |
N |
| Turn signal right is received |
Right |
| REAR CAMERA IMAGE SIGNAL |
Ignition switch ON |
Camera image signal is received |
On |
| Camera image signal is not received |
Off |
| ITS SW 2 |
Ignition switch ON |
For this vehicle, the displaying is fixed |
No setting |
| ITS SW 2 IND |
Ignition switch ON |
For this vehicle, the displaying is fixed |
No setting |
| WASH SW |
Ignition switch ON |
Wash switch signal is pressed |
On |
| Wash switch signal is not pressed |
Off |
| PUMP COMM STATUS |
Ignition switch ON |
Pump communication signal is received |
On |
| Pump communication signal is not received |
Off |