Active Test
CAUTION:
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the following systems warning indicators are illuminated:
- Lane Departure Warning indicator
- Blind Spot Warning indicator
- Place the shift selector to P (park) position, and then perform the test.
| Test item | Description | |
|---|---|---|
| WASH ACTIVE | ON | Activates the washer to clean the lens of rear camera |
| OFF | ||
| LED LH INDICATOR | ON | Flashes the left side LED light for ITS system |
| OFF | ||
| LED RH INDICATOR | ON | Flashes the right side LED light for ITS system |
| OFF | ||
| AIR ACTIVE | ON | Activates the air pump to clean the lens of rear camera |
| OFF | ||
| AIR & WASH ACTIVE | ON | Activates the air pump and washer to clean the lens of rear camera |
| OFF | ||
| Test item | Operation | Description | Blind Spot Warning ON indicator lamp (Yellow) |
|---|---|---|---|
| BSW ON INDICATOR | Off | Stops transmitting the Blind Spot Warning ON indicator signal below to end the test | Off |
| On | Transmits the Blind Spot Warning ON indicator signal to the warning lamp on the door | ON | |
| Washer | Off | Stops transmitting activate signal to washer below to end the test | Off |
| On | Transmits activate signal to washer | ON | |
| Air pump | Off | Stops transmitting activate signal to air pump below to end the test | Off |
| On | Transmits activate signal to air pump | ON |