LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Juke SV, FWD, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) >> System Description >> System >> Cooling Fan Control >> COOLING FAN CONTROL: System Description >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS) Engine speed(1) Cooling fan control IPDM E/R
โ†“
Cooling fan control module
โ†“
Cooling fan motor
Camshaft position sensor (PHASE)
Engine coolant temperature sensor Engine coolant temperature
Refrigerant pressure sensor Refrigerant pressure
Battery Battery voltage(1)
Combination meter CAN communication Vehicle speed signal
BCM CAN communication A/C ON signal
A/C evaporator temperature(1)
Target A/C evaporator temperature(1)
Blower fan ON signal(1)
(1) The ECM determines the start signal status by the signals of engine speed and battery voltage.