October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Input Signal And Output Signal
Major signal transmission between each unit via communication lines is shown in the following table.
| Component |
Signal description |
| Yaw rate/side/decel G sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line:
- Yaw rate signal
- Side G sensor signal
- Decel G sensor signal
|
| VCM |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:
- Accelerator pedal position signal
- VCM control signal
- Shift position signal
|
| Electrically-driven intelligent brake |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication line:
- Electrically-driven intelligent brake control signal
- Brake warning lamp request signal
- Brake system warning lamp request signal
|
| Steering angle sensor |
Mainly transmits the following signal to ABS actuator and electric unit (control unit) via CAN communication:
- Steering angle sensor signal
|
| Combination meter |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:
- Brake fluid level switch signal
- Parking brake switch signal
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication:
- ABS warning lamp signal
- VDC warning lamp signal
- Brake warning lamp signal
- Brake system warning lamp signal
- VDC OFF indicator lamp signal
|